Checkline DS2 User Manual download pdf (Page 3)

page 3

On/Off

Power ON, capacity is dis-

played.After 10 minutes, unit

powers down if no key is

pressed.

Zero

Tares weight of attachment

and resets peak value

Peak

Press to activate Peak mode

RS-232 Port

See page 8 for pin assignments

Measuring Shaft

Attach any of the included

standard attachments or

optional special attach-

ments to measure tension

or compression forces.

up to 110 lbf– #10-32

220 lbf– M6

Send

Transmit display value

Charger Port

Recharge the internal

NiMH ba

tery or use the

Imada AD120 or AD230

adapters only.

Compression icon

Indicates compression measurement

Tension icon

Indicates tension measurement

Units indicator

Displays selected measuring unit. (ozf,

lbf, kgf or N).

Battery icon

Flashes when gauge needs to be

recharged

GO/NG Indicator

under low setpoint

between low and high setpoints

over high setpoint

Negative sign

Displayed when measuring tension

Peak icon

Displays continuously when peak

mode is active

–

1 2

345

LCD DISPLAY

RECHARGING NI-MH BATTERY

1. To maximize the life of the battery, power is shut off after 10

minutes of non-use. Automatic shut off is bypassed when used

with the AC adapter/charger.

2. Battery icon will flash when the gauge needs to be recharged.

3. Turn off power. Only use the IMADA AC adapter/charger pro-

vided, AD120 for 115VAC, AD230 for 230VAC. Plug into the

correct AC output. It takes 10 hours to charge fully.

4. When the gauge is turned off, make sure the AC adapter/charger

is disconnected to avoid overcharging.

Optional Cables

CB-101 Analog cable (10')

CB-203 RS-232C cable

(10', 9 pin female)

CB-301 Digimatic Cable (10')

ACCESSORIES

Optional SW-1 Data Acquisition Software

Use SW-1software to capture and analyze peak data from DS-2 force

gauges.A running log of all the data is displayed along with a chart.

Calculate max/min, average, and standard deviation.

Optional Handle

The OH-1 optional handle fits DS2 gauges.

Constructed of high quality steel for rugged use,

the handle facilitates measurements of heavy

loads. Complete with mounting screws.

page 10

1 2 3 4 5 6

Comments to this Manuals

No comments

Checkline DS2 User Manual Page 3

Comments to this Manuals

Related products and manuals for Sensors Checkline DS2