Checkline TI-25DL-MMX User Manual download pdf (Page 16)

– 16 –

7.0 CHANGING UNITS (IN/MM)

The TI-25DL-MMX has the ability to display measurements in both the English

(IN) and Metric (MM) systems. The following steps outline the procedure for

changing units:

1. Press ON/OFF key to power up the TI-25DL-MMX.

2. Press the MODE key to activate features and settings.

3. Press the UP or Down arrow keys to scroll to the unIt symbol.

4. Press the SEND key to toggle the status of the units— IN / MM.

5. Press the MODE key once again to return to measurement mode.

8.0 THE BACK LIGHT

The back light of the TI-25DL-MMX can be set to three different positions

on/off/auto. The following steps outline the procedure for changing the settings of

the back light:

1. Press ON/OFF key to power up the TI-25DL-MMX.

2. Press the MODE key to activate features and settings.

3. Press the UP / Down arrow keys to scroll to the LItE symbol.

4. Press the SEND key to toggle the status of the back light on/off/auto.

5. Press the MODE key once again to return to measurement mode.

9.0 SCAN MODE

While the TI-25DL-MMX excels at making single point measurements, it is

sometimes desirable to examine a larger region, searching for the thinnest point.

The TI-25DL-MMX includes a feature, called Scan Mode, which allows it to do

just that.

In normal operation, the TI-25DL-MMX performs and displays four

measurements every second, which is quite adequate for single measurements. In

Scan Mode, however, the tool performs sixteen measurements every second.

While the transducer is in contact with the material being measured, the TI-25DL-

MMX is keeping track of the lowest measurement it finds. The transducer may be

“scrubbed” across a surface, and any brief interruptions in the signal will be

ignored. When the transducer loses contact with the surface for more than a

second, the TI-25DL-MMX will display the smallest measurement it found.

1. Press ON/OFF key to power up the TI-25DL-MMX.

2. Press the MODE key to activate features and settings.

3. Press the UP / Down arrow keys to scroll to the SCAn symbol.

4. Press the SEND key to toggle the scan mode on/off. of the back light

on/off/auto.

5. Press the MODE key once again to return to measurement mode.

– 17 –

10.0 ALARM MODE

The Alarm Mode feature of the TI-25DL-MMX allows the user to set an audible

and visual parameter when taking measurements. If the measurement falls below

a nominal value, set by the user, a red light will be illuminated on the front panel

of the gauge and the beeper sounded. This improves the speed and efficiency of

the inspection process by eliminating constant viewing of the actual reading dis-

played. The following procedures outline how to enable and set up this feature:

Using the Beeper

1. Press ON/OFF key to power up the unit.

2. Press MODE key to activate features and settings.

3. Press the UP or DOWN arrow keys to scroll to bEEP.

4. Press the SEND key to toggle the status of the beeper on/off.

5. Press the MODE key once again to return to measurement mode.

Alarm Mode

1. Press ON/OFF key to power up the TI-25DL-MMX.

2. Press the MODE key to activate features and settings.

3. Press the UP / Down arrow keys to scroll to the ALAr symbol.

4. Press send key to toggle ALAr status on/off.

5. Status ON -A nominal value will be displayed with the units IN/MM

flashing.

6. Press the UP or DOWN arrow keys to scroll to the desired nominal

thickness value.

7. Press the SEND key to select the desired nominal value and return to

mode menu.

8. Press the MODE key once again to return to measurement mode.

1 2 ... 11 12 13 14 15 16 17

Comments to this Manuals

No comments

Checkline TI-25DL-MMX User Manual Page 16

Comments to this Manuals

Related products and manuals for Sensors Checkline TI-25DL-MMX